DSP TP104-plus Specifications download pdf (Page 85)

4-3

Front Panel

Ch1 & Ch2 Outputs

The Channel 1 and Channel 2 outputs can be con-

figured to output a voltage from -10 V to +10 V

proportional to X, Y, R, θ, or Traces 1 through 4.

±10 V is full scale. The outputs can source 10 mA

maximum.

Signal Inputs

The input mode may be single-ended, A, or diffe-

rential, A-B. The A and B inputs are voltage inputs

with 10 MΩ, 25 pF input impedance. Their connec-

tor shields are isolated from the chassis by 10 Ω

(Ground) or 1 kΩ (Float). Do not apply more than

50 V to either input. The shields should never

exceed 1 V. The I (current) input is 1 kΩ to a virtu-

al ground.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 99 100

No comments

DSP TP104-plus Specifications Page 85